Diy Pulley Tensioner or Pulley Idler for Rc Counter Steer mod

Diy Pulley Tensioner

Here's an update version of my Diy Pulley Tensioner or Pulley Idler

I will be using the HB Cyclone-S pulley for this project
you can get them here


Cut the side knob and sand it down even



You need a 1/4 drill bit to bore for an opening
for the flanged bearing about 2mm deep



Flanged bearing size 3x6x2.5mm
you can get them here



Test the flanged bearing into the pulley
then repeat process to the other side



Here's the 3racing belt tension available here



Final assembly

Project Diy Rc Body Roof Rack

Here's my simple version of Diy Rc Body Roof Rack

I will be recycling some of my rc stuff for this project

Things you need: lexan plastic tree parts screws double sided tape screw driver xacto knife scissors
black marker

Join us at RcDriftRevolution.com

Preview of my Diy Rc Body Roof Rack




You need a piece lexan from your rc body
cut outs to make the legs



Tamiya plastic tree parts for the bar



You need to trace 4 of this roof rack legs



Mark the rc body where you want the roof rack legs
then cut a small line for the legs, you can use a dremel
to make cuttings easier



Insert the legs to test the height you want



Bend all the lexan into an L shape when you get the
right height and paint them with a black marker
also drill a hole for the mounting screw



Insert all the legs into the body and secure
them with double sided tape



For the bar you need to cut it from the plastic tree
make 2 of this



then screw them to the legs




I hope you enjoy this simple Diy rc roof rack project



Join us at RcDriftRevolution.com

When your done share us your version at RCDR (forum)

DIY Rc Pop Up Headlights

Here's my version of DIY Pop Up Headlights or Flip Headlights for more info go to RcDriftrevolution.com forum under DIY section.